Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50822182-ds-k2601-g/bg6c.png)
Edit Linkage
Sengs
Select the congured linkage sengs in the device list and you can edit its
event source parameters, including event source and linkage target.
Delete Linkage
Sengs
Select the congured linkage sengs in the device list and click Delete to
delete it.
Congure Device Linked Acons for Card Swiping
You can set the access control device's linkage acons for the specied card swiping. When you
swipe the specied card, it can trigger the alarm output, host buzzer, and other acons on the
same device.
Perform this task when you need to congure the access control device linkage for the card
swiping acon.
Steps
Note
It should be supported by the device.
1.
Click Event Management → Event Card Linkage .
2.
Select the access control device from the list on the le.
3.
Click Add buon to add a new linkage.
4.
Select the event source as Card Linkage.
5.
Input the card number or select the card from the dropdown list.
6.
Select the card reader where the card swipes to trigger the linked acons.
7.
In the Linkage Target panel, set the property switch to on to enable this acon.
Host Buzzer
The audible warning of access control device will be triggered.
Capture
The real-me capture will be triggered.
Recording
The recording will be triggered.
Note
The device should support recording.
Card Reader Buzzer
The audible warning of card reader will be triggered.
Alarm Output
The alarm output will be triggered for nocaon.
Zone
Access Controller User Manual
96
Loading ...
Loading ...
Loading ...