Loading ...
Loading ...
Loading ...
Note
When the oine device comes online, the soware will connect it automacally.
9.
Click Add to add the device.
Import Devices in a Batch
The devices can be added to the soware in batch by inpung the device informaon in the pre-
dened CSV le.
Perform this task to import devices in a batch.
Steps
1.
Enter the Device Management page
2.
Click Device → Hikvision Device → Add to open the adding device window.
3.
Select Batch Import as the adding mode.
4.
Click Export Template and then save the pre-dened template (CSV le) on your PC.
5.
Open the exported template le and input the required informaon of the devices to be added
on the corresponding column.
Adding Mode
You can input 0, 2, 3, 4, 5, or 6 which indicated dierent adding modes. 0 indicates that the
device is added by IP address or domain name; 2 indicates that the device is added via IP
server; 3 indicates that the device is added via HiDDNS; 4 indicates that the device is added via
EHome protocol; 5 indicates that the device is added by serial port; 6 indicates that the device
is added via Hik-Connect.
Address
Edit the address of the device. If you set 0 as the adding mode, you should input the IP address
or domain name of the device; if you set 2 as the adding mode, you should input the IP
address of the PC that installs the IP Server; if you set 3 as the adding mode, you should input
www.hik-online.com.
Port
Input the device port No. The default value is 8000.
Device Informaon
If you set 0 as the adding mode, this eld is not required; if you set 2 as the adding mode, input
the device ID registered on the IP Server; if you set 3 as the adding mode, input the device
domain name registered on HiDDNS server; if you set 4 as the adding mode, input the EHome
account; if you set 6 as the adding mode, input the device serial No.
User Name
Input the device user name. By default, the user name is admin.
Password
Access Controller User Manual
51
Loading ...
Loading ...
Loading ...