Loading ...
Loading ...
Loading ...
Note
Input the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Person's Basic Informaon.
3.
Click Credenal → Fingerprint tab to enter the card credenal sengs page.
4.
Select the collecon mode as Remote Collecon.
5.
Click Start and select an access control device to collect the ngerprint.
Note
The funcon should be supported by the device.
6.
Collect the ngerprint.
1) Select a ngerprint on the hand picture to start collecng.
2) Li and rest the corresponding ngerprint on the device's ngerprint module to collect the
ngerprint.
3) Select a ngerprint type.
4) Click Stop.
7.
Conrm adding the person.
-
Click OK to add the person and close the Add Person window.
-
Click Save and Connue to add the person and connue to add other persons.
Congure Aendance Rule
When adding person, you can congure the person's aendance rule if the applicaon scenario is
non-residence mode and the person joins in the me and aendance.
Perform this task when you need to congure the person's aendance rule when adding person.
Steps
Note
For details about aendance sengs and applicaon, refer to Time and Aendance .
1.
Enter Access Control → Person and Card .
2.
Select an organizaon in the organizaon list to add the person and click Add.
3.
Enter person's basic informaon.
Note
For details about conguring person's basic informaon, refer to Congure Person's Basic
Informaon .
4.
Click Aendance Rule tab.
Note
This tab page will display when you select Non-Residence mode as the applicaon scene when
running the soware for the rst me. For details, refer to Select Applicaon Scenario .
Access Controller User Manual
63
Loading ...
Loading ...
Loading ...