Loading ...
Loading ...
Loading ...
5) Oponal: Click or to set the card swiping order.
6) Click the added authencaon group in the right list to set card swiping mes.
Note
●
The card swiping mes should be larger than 0 and smaller than the added card quanty in
the card group.
●
The maximum value of card swiping mes is 16.
7) Click OK.
Note
●
For each access control point (door), up to four authencaon groups can be added.
●
For the authencaon group of which authencaon type is Local Authencaon, up to 8
card groups can be added to the authencaon group.
●
For the authencaon group of which authencaon type is Local Authencaon and Super
Password or Local Authencaon and Remotely Open Door, up to 7 card groups can be
added to the authencaon group.
7.
Click Save.
Congure Opening Door with First Card
You can set mulple rst cards for one access control point. Aer the rst card swiping, it allows
mulple persons access the door or other authencaon acons.
Before You Start
Set the card permission and apply the permission seng to the access control device. For details,
refer to
Assign Permission to Person .
Perform this task when you want to congure opening door with rst card.
Steps
1.
Click Access Control → Advanced Funcon → Open Door with First Card to enter the Open
Door with First Card page.
2.
Select an access control device in the list of Controller List panel.
3.
Select the rst card mode as Remain Open with First Card, Disable Remain Open with First
Card, or First Card Authorizaon from the drop-down list for each access control point of the
selected device.
Remain Open with First Card
The door remains open for the congured me duraon aer the rst card swiping unl the
remain open duraon ends. If you select this mode, you should set the remain open duraon.
Note
The remain open duraon should be between 0 and 1440 minutes. By default, the remain
open duraon is 10 minutes.
Access Controller User Manual
83
Loading ...
Loading ...
Loading ...