Loading ...
Loading ...
Loading ...
Steps
Note
The linkage acons here refer to the linkage of the client soware's own acons such as audible
warning, email linkage, etc.
1.
Click Event Management → Access Control Event .
The added access control devices will display in the device list.
2.
Select a resource from the device list.
The event types which the selected resource supports will display.
3.
Select the event(s) and click Edit Priority to dene the priority for the event(s), which can be
used to lter events in the Event Center.
4.
Set the linkage acons of the event.
1) Select the event(s) and click Edit Linkage to set the client acons when the events triggered.
Audible Warning
The client soware gives an audible warning when alarm is triggered. You can select the
alarm sound for audible warning.
Note
For seng the alarm sound, please refer to Set Alarm Sound in the user manual of the
client soware.
Email Linkage
Send an email nocaon of the alarm informaon to one or more receivers.
2) Click OK.
5.
Enable the event so that when the event is detected, en event will be sent to the client and the
linkage acons will be triggered.
6.
Oponal: Click Copy to... to copy the event sengs to other access control device, alarm input,
door, or card reader.
Congure Device Linkage for Access Control Alarm
You can set the access control device's linkage acons for the access control device's triggered
alarm. When the alarm is triggered, it can trigger the alarm output, host buzzer, and other acons
on the same device.
Perform this task when you need to congure the access control device linkage for the device's
access control alarm.
Steps
Note
It should be supported by the device.
Access Controller User Manual
94
Loading ...
Loading ...
Loading ...