Hikvision DS-K2601-G User Manual

Loading ...

Arm or disarm the zone.

Note

The device should support zone funcon.

Access Control Point

The door status of open, close, remain open, and remain close will be triggered.

Note

The door status of open, close, remain open, and remain close cannot be triggered at the

same me.

Audio Play

The audio prompt will be triggered. And the select audio index related audio content will be

played according to the congured play mode.

Click Save.

When the card (congured in Step 5) swipes on the card reader (congured in Step 6), it can

trigger the linked acons (congured in step 7).

Oponal: Aer adding the device linkage, you can do one or more of the following:

Delete Linkage

Sengs

Select the congured linkage sengs in the device list and click Delete to

delete it.

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit its

event source parameters, including event source and linkage target.

Congure Employee ID Linkage

When person enter the employee ID on the specied card reader, it can trigger linkage acons of

other devices, such as alarm output, opening door, etc.

Before You Start

Add person. For details, see Manage Person Informaon.

Steps

Click Event Management → Event Card Linkage to enter the Event Card Linkage page.

Select an access control device from the list on the le.

Click Add to add a new linkage.

Select the event source as Employee ID Linkage.

Select an employee ID from the drop-down list.

In the Linkage Target panel, set the property switch to On to enable the linkage acon.

Host Buzzer

The audible warning of access control device will be triggered.

Capture

Access Controller User Manual

Loading ...

Hikvision DS-K2601-G Pro Series Access Controller