Loading ...
Loading ...
Loading ...
1) Select the card from the dropdown list.
2) Select the access control device as event source device.
3) Select the card reader for triggering.
5.
Set the target access control device as linkage target.
1) Select the access control device from the dropdown list as the linkage target.
2) Set the switch to on to enable the linkage acon.
Alarm Output
The alarm output pf the target device will be triggered for nocaon.
Access Control Point
The door status of open, close, remain open, and remain close will be triggered.
Note
The door status of open, close, remain open, and remain close cannot be triggered at the
same me.
6.
Click Save.
Congure Cross-Device Linkage for Employee ID
When person enter the employee ID on the specied card reader, it can trigger linkage acons of
other access control device, such as alarm output, opening door, etc.
Perform this task when you need to congure other access control device's linkage acons for
entering employee ID.
Steps
1.
Click Event Management → Cross-Device Linkage to enter the cross-device linkage conguraon
interface.
2.
Click Add to add a new cross-device linkage.
3.
Select the linkage type as Employee ID Linkage.
4.
Set the employee ID.
1) Select the access control device as event source device.
2) Select the card reader for triggering.
5.
Set the target access control device as linkage target.
1) Select the access control device from the dropdown list as the linkage target.
2) Set the switch to on to enable the linkage acon.
Alarm Output
The alarm output pf the target device will be triggered for nocaon.
Access Control Point
The door status of open, close, remain open, and remain close will be triggered.
Access Controller User Manual
100
Loading ...
Loading ...
Loading ...