Loading ...
Loading ...
Loading ...
Note
Up to four doors can be added in one mul-door interlocking combinaon.
5.
Click OK to add the selected access control point(s) for interlocking.
The congured mul-door interlocking combinaon will list on the Mul-door Interlocking List
panel.
6.
Oponal: Select an added mul-door interlocking combinaon from the list and click Delete to
delete the combinaon.
7.
Click Save.
Congure Authencaon Password
You can input the authencaon password on the card reader keypad to open the door aer
seng the authencaon password.
Perform this task when you want to congure authencaon password to open door.
Note
●
The authencaon password funcon should be supported by the access control device.
●
Up to 500 cards with authencaon password can be added to one access control device. The
password should be unique and cannot be same with each other.
Steps
1.
Click Access Control → Advanced Funcon → Authencaon Password to enter the
authencaon password conguraon page.
2.
Select an access control device in the list of Controller List panel.
All the applied cards and persons will display on the Card List panel.
Note
For seng and applying the permissions to the device, refer to Assign Permission to Person .
3.
Click the eld of each card in the Password column to input the authencaon password.
Note
The authencaon password should contain 4 to 8 digits.
4.
Click Save at the upper-right corner of Authencaon Password page to save the sengs.
The authencaon password funcon of the card will be enabled automacally. And you can set
the card reader authencaon mode of access control device as Card or Authencaon
Password. Refer to Congure Card Reader Authencaon Mode and Schedule for details.
Access Controller User Manual
90
Loading ...
Loading ...
Loading ...