Loading ...
Loading ...
Loading ...
When the camera is in playback mode, ‘slate for’ identifies the clip the
slate applies to and shows the ‘good take’ button. In standby mode, the
slate is for ‘next clip’ and shows the ‘good take last clip’ button.
Slate for
This setting shows the clip which the metadata currently displayed in the ‘clip’ applies to.
Inplayback mode it applies to the current clip, and in standby mode it refers to the next clip
you record.
Lens Data
These settings display information about the current lens fitted to your camera. Many electronic
lenses automatically supply information such as the lens model, aperture and focal length.
Ifyou are using a lens that does not provide this information, or you want to enter additional
data, you can tap the pencil icon in this setting to enter the information manually. This will bring
up the ‘lens data’ menu, which contains the following information:
The ‘lens data’ menu showing information automatically populated from an
attached lens, and filter information that has been manually entered
Lens Type
Shows the lens model. If your lens type is not automatically shown here, you can tap
this setting to enter the data manually. Your camera has an internal database stored
formany commonly used lenses, so if you need to enter data manually, your camera
will suggest names automatically as you type. This makes entering data much faster.
93Entering Metadata
Loading ...
Loading ...
Loading ...