Loading ...
Loading ...
Loading ...
The setting you choose is applied when a CFast or SD card is inserted. You can override this
setting at any time by entering the storage manager and tapping the card name to set it as
active. It’s important to note, however, that ejecting and reinserting cards reverts to the current
‘preferred card for recording’ setting.
The ‘fullest card first’ setting is based on the percentage that your recording media are filled,
rather than their sizes or the amount of data used.
Stop Rec If Card Drops Frame
Use this setting to configure the behavior of your Blackmagic Pocket Cinema Camera when
dropped frames are detected. When set to ‘off,’ recording continues with dropped frames.
When set to ‘on,’ your camera stops recording if dropped frames are detected. This can prevent
you wasting time shooting unusable footage if you don’t spot the dropped frame indicator.
TIP Refer to the ‘Storage Media’ section for more information on how to avoid
dropping frames.
Record Settings 3
The third page of the ‘record’ settings tab contains the following settings.
Timelapse
This setting activates the timelapse feature to automatically record a still frame at the following
intervals:
Frames 2 – 10
Seconds 1 – 10, 20, 30, 40, 50
Minutes 1 – 10
For example, you can set the camera to record a still frame every 10 frames, five seconds,
30seconds, five minutes etc.
The timelapse feature offers many creative options. For example, setting a two frame timelapse
interval gives your recorded video a high speed effect when played back.
65Settings
Loading ...
Loading ...
Loading ...