Loading ...
Loading ...
Loading ...
15 Record
Press the record button to begin recording immediately. Press again to stop recording.
16 Still
To capture a single uncompressed DNG frame, press the ‘still’ button. A camera icon
appears briefly in the top right corner of the touchscreen display to let you know you
have successfully captured a still. Image files are saved to the ‘stills’ folder in the root
directory of the media you are currently recording to. These follow the file naming
convention for video clips but the filename has ‘S001’ representing the ‘still number’
asthe last four characters of the filename.
17 ISO
Press the ISO button and then rotate the settings wheel to adjust your camera’s
ISOsetting. ISO can be set at 1/3 stop increments between 100 and 25,600.
18 Shutter
To change the shutter angle or shutter speed, press the shutter button, then rotate the
settings wheel. The touchscreen display will also suggest up to three flicker free
shutter options.
19 White Balance
Press the white balance button and then rotate the settings wheel to adjust your
camera’s white balance. You can also quickly enter the ‘auto white balance’ screen
byholding the ‘wb’ button for 3 seconds. Your camera will overlay a white square in
thecenter of your image, and use this area to perform an auto white balance. For more
information refer to the ‘touchscreen controls’ section.
20 Viewfinder Connector Port
Pocket Cinema Camera 6K Pro has a connector port for Blackmagic Cinema Camera
Pro EVF. If the optional electronic viewfinder is not installed, you can attach the
supplied protective cover.
21 Power Switch
Power switch for turning on the camera. Slide the switch to the right to power on your
camera, and to the left to power off.
22 Status LED
When the camera is turned off and plugged into external power via the
12V DC power jack or USB-C port, the indicator illuminates red to indicate
the battery is being charged.
The status LED turns off when the battery is fully charged.
23 Function Buttons
These buttons can be programmed to a variety of commonly used functions
using your camera’s ‘setup’ menu. By default, button one is set to ‘false color’,
button 2 is set to ‘display LUT’ and button 3 is set to ‘frame guides’.
34Camera Features
Loading ...
Loading ...
Loading ...