Loading ...
Loading ...
Loading ...
Toggle When set to this behavior, pressing a function button toggles a particular
setting on or off. The ‘setting’ menu is greyed out in this mode. Instead, tap
the left or right arrows in the parameter menu to scroll through the available
options. These are ‘off speed recording’, ‘ois’, ‘clean feed’, ‘display LUT’,
‘frame guides’, ‘focus assist’, ‘false color’, ‘zebra’, ‘grid’ and ’safe area guide’.
Use the ‘Toggle’ behavior to select the output this setting applies to. Tap any
combination of ‘LCD’ and ‘HDMI’ to select. Ifthe output for an option cannot
be selected, such as ‘off speed rec’ which always applies to all outputs, the
separate ‘LCD’ and ‘HDMI’ settings are disabled.
Setup Settings 3
The third page of the ‘setup’ tab contains the following settings.
Page 3 of the ‘setup’ tab
Tally Light LED
Pocket Cinema Camera has a small LED on the front to indicate the recording status of the
camera and the program and preview tally status when connected to Blackmagic ATEM Mini.
If you connect Pocket Cinema Camera to ATEM Mini to remotely control recording and camera
settings, the tally shows when the camera is on air or being previewed. For more information,
refer to the ‘Camera Control with ATEM Mini’ section.
Recording to storage media in the camera.
Camera is live on air.
Camera is about to go on air.
To enable or disable the tally light indicator, use the ‘tally light LED’ switch.
LED Brightness
To set the brightness of the tally light LED, tap ‘low,’ ‘medium,’ or ‘high.’
81Settings
Loading ...
Loading ...
Loading ...