Loading ...
Loading ...
Loading ...
Channel Status
The channel status at the top of each camera controller displays the camera label, On Air
indicator and lock button. Press the lock button to lock all the controls for a specific camera.
When on air, the channel status illuminates red and displays the On Air alert.
Camera Settings
The camera settings button near the bottom left of the master wheel lets you adjust detail
settings for each camera’s picture signal.
Each camera controller displays
the channel status so you
know which camera is on air.
Use the color wheels to adjust
each YRGB channel’s lift,
gamma and gain settings.
Detail
Use this setting to sharpen the image from your cameras live. Decrease or increase
the level of sharpening by selecting: Detail off, detail default for low sharpening,
medium detail and high detail.
Color Wheel
The color wheel is a powerful feature of the DaVinci Resolve color corrector and used
to make color adjustments to each YRGB channel’s lift, gamma and gain settings.
Youcan select which setting to adjust by clicking on the three selection buttons above
the color wheel.
Master Wheel
Use the master wheel below the color wheel to make contrast adjustments to all
YRGB channels at once, or luminance only for each lift, gamma or gain setting.
Reset Buttons
The reset button near the bottom right of each camera controller lets you easily choose
color correction settings to reset, copy or paste. Each color wheel also has its own
reset button. Press to restore a setting to its default state, or copy/paste a setting.
Locked controllers are not affected by the Paste feature.
The master reset button on the bottom right corner of the color corrector panel lets
you reset lift, gamma and gain color wheels plus Contrast, Hue, Saturation and Lum Mix
settings. You can paste color correction settings to camera controllers individually,
or all cameras at once for a unified look. Iris, focus, coarse and pedestal settings are
not affected by the Paste feature. When applying Paste to all, a warning message will
appear asking you to confirm your action. This is so you don’t accidentally paste new
settings to any unlocked cameras that are currently on air.
When applying ‘paste to all’, a warning message will appear asking
you to confirm your action. This is so you don’t accidentally paste
new settings to any unlocked cameras that are currently on air.
130Camera Control with ATEM Mini
Loading ...
Loading ...
Loading ...