Loading ...
Loading ...
Loading ...
Your camera’s internal battery can be charged via USB when the camera is switched off. This is
convenient as you can use a portable power bank to charge the camera when not in use.
Blackmagic Pocket Cinema Camera supports charging via standard 10W USB wall chargers and
can also be used with chargers that support USB-Power Delivery, or USB PD. USB PD chargers
typically have a USB-C connection and up to 20V output, so can provide a faster charge.
Charging the internal battery via the 12V DC power input is supported when the camera is
switched on or off.
TIP If charging a hot battery immediately after use, charging speed is reduced until
the battery cools below 45 ˚C or 113 ˚F. We recommend letting the battery cool down
for 15 minutes before charging.
You are now ready to insert the storage media and start recording!
Storage Media
Your Blackmagic Pocket Cinema Camera uses standard SD cards, faster UHS-II SD cards or
CFast 2.0 cards to record video.
Using the USB-C expansion port, you can also connect high capacity USB-C flash disks
forincreased recording times.
CFast Cards
CFast 2.0 cards are capable of supporting very high data rates, so are perfect for recording
6K, 4K and HD video at high frame rates. Refer to the record duration tables in the ‘recording’
section for details on the maximum frame rates that can be recorded in each format.
NOTE CFast 2.0 cards are generally high speed cards, though some cards have
slower write speeds compared to read speeds, and maximum data rates can differ
between models. For reliable recording with your chosen frame rates, use only the
cards recommended by Blackmagic Design.
To insert a CFast card:
1 2
To access the media slots, slide the door on the
right side toward the back of the camera.
The spring loaded door opens so you can access
the CFast and SD memory card slots.
8Storage Media
Loading ...
Loading ...
Loading ...