Loading ...
Loading ...
Loading ...
Display Status Text For Cinematographer or Director
The LCD touchscreen displays information such as ISO, white balance, and aperture that is
useful to a camera operator or cinematographer setting up individual shots on that camera.
Your camera’s HDMI output, however, can also show information useful to a director or script
supervisor who is keeping track of multiple shots or cameras.
Your Blackmagic Pocket Cinema Camera can display
director specific status text on its HDMI output
Setting the status text to ‘director’ in the HDMI monitor settings changes the status text for that
output to show the following information.
FPS
Displays the currently selected frames per second for that camera. If off speed frame
rate is disabled, only the project frame rate is shown. If an off speed frame rate is being
used, the sensor frame rate is shown, followed by the project frame rate.
CAM
Displays the camera index as set in your camera’s slate. For more information,
see the ‘slate’ section.
OPERATOR
Identifies the camera operator as set in your camera’s slate. For more information,
see the ‘slate’ section.
DURATION DISPLAY
Displays the duration of the current clip while recording, or the last recorded clip
in the following format: hours:minutes:seconds.
REEL, SCENE, TAKE
Displays the current reel, scene and take. For more information on reels, scenes,
takes and their labelling conventions, refer to the ‘slate’ section.
DYNAMIC RANGE
The bottom left hand corner of the monitor displays the currently applied LUT, if applied
to that output. If no LUT is applied, ‘film’ or ‘video’ dynamic range is displayed.
TIMECODE
The bottom right of the monitor displays your camera’s timecode, in the
following format:
hours:minutes:seconds:frames.
71Settings
Loading ...
Loading ...
Loading ...