Loading ...
Loading ...
Loading ...
Press > More > Bias, rotate the multifunction knob or use the numeric keypad
to set the desired bias voltage.
NOTE
If the zero-cross voltage of the channel has a larger amplitude offset that exceeds the
adjustable null range, please perform self-calibration for the instrument to ensure the
measurement accuracy. For details, refer to descriptions in "
SelfCal
".
5.14 Channel Label
The instrument uses the channel number to mark the corresponding channel by
default. For ease of use, you can also set a label for each channel. For example, " ".
Press > More > Label to enter the label setting menu. You can use the built-in
label or manually input a label. Three input methods are available for you to input a
label name, including Chinese, English, and Traditional Chinese.
The label setting menu includes the following menu items.
• Press Display to turn on or off the display of the channel label. If it is enabled,
the label will be displayed at the left side of the waveform. When on, CH1 is, by
default, displayed to be the channel label.
• Press Library to select the preset labels such as CH1, ACK, ADDR, BIT, CLK, CS,
DATA, IN, MISO, MOSI, OUT, RX and TX.
• Press Label, and the label editing interface is automatically displayed, as shown
in
Figure 5.3
. You can input the label manually. For details, refer to descriptions
in "
To Create a Folder
".
Label Input Area
Virtual Keypad
Delete KeyInput Selection Area
Upper/Lower Case Switch
Figure 5.3 Label Editing Interface
To Set the Vertical System
58
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...