Loading ...
Loading ...
Loading ...
16.4 To Adjust the Ref Waveform Display
After pressing SaveToRef, you can adjust the vertical scale and offset of the reference
waveform specified under Current.
Press VScale, then rotate the multifunction knob or use the pop-up numeric
keypad to set the vertical scale of the reference waveform. Press VOffset, then rotate
the multifunction knob or use the pop-up numeric keypad to set the vertical offset
of the reference waveform. In the Ref function, You can also directly rotate Wave
Vertical SCALE and Wave Vertical POSITION respectively to modify the vertical
scale and the vertical offset.
16.5 To Save to Internal Memory
Press SaveToRef to save the displayed waveform for the specified source to the
internal memory as the reference waveform.
NOTE
This operation only saves the reference waveform to the volatile memory, and the waveform
will be cleared at power-off or restoring to the default settings.
16.6 To Clear the Display of the Reference Waveform
Press Clear to clear the display of the current reference waveform on the screen.
Meanwhile, the VScale and VOffset menus for the reference waveform are grayed
out and disabled. You can also press on the front panel to clear the display of
the reference waveforms of all the reference channels.
NOTE
This operation only clears the display of the reference waveform on the screen, and the
reference waveform is still saved in the memory.
16.7 To View Details of the Reference Waveform
Press More > Details, and the detailed information about all the reference waveforms
will be displayed on the screen in the form of a list. Press Details again to close the
details list. You can also enable the touch screen to tap the icon at the right-upper
corner of the table to close it.
Reference Waveform
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
281
Loading ...
Loading ...
Loading ...