Loading ...
Loading ...
Loading ...
- When CH1-CH4 or EXT is selected as the trigger source, you need to set a
proper trigger level.
- When D0-D15 is selected as the trigger source, you need to set a proper
threshold level.
- The trigger level label is displayed at the left section of the screen, and the
trigger level/threshold level value is displayed at the upper-right corner of the
screen.
- When you use Trigger LEVEL to modify the trigger level/threshold level, the
trigger level/threshold level value will change with the up and down of .
13. Operation Menu
Press any softkey on the front panel to activate the corresponding menu.
14. Notification Area
Displays the beeper icon, the USB storage device icon, time, and the LAN
connection icon.
- Sound icon: Press > Sound to turn on or off the sound. When the sound
is turned on,
will be displayed; when off, will be displayed.
- USB storage device icon: When a USB storage device is detected, will be
displayed.
- Time: displays the system time. For the system time setting, refer to
descriptions in "
System Time
".
- LAN connection icon: When the LAN interface is successfully connected,
will be displayed.
15. AWG 2
- Displays the on/off status of AWG 2.
- Displays the waveform type set for the current AWG 2.
- It is only available for the model installed with the MSO8000-AWG option.
Quick Start
34
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...