Loading ...
Loading ...
Loading ...
line number, time, frame ID, data length code (DLC), cyclic redundancy check
(CRC), and Acknowledgement (ACK) information.
- Open or close the event table: Press Event Table continuously to enable or
disable the display of the event table. When enabled, the following event
table as shown in
Figure 15.11
is displayed. You can also enable the touch
screen to tap the icon at the right-upper corner of the event table to close
it.
CAN Bus
Event Table
Line Number
Time
ACKCRC Frame ID DLC
Decoded Data
Figure 15.11 CAN Decoding Event Table
NOTE
- When you adjust the horizontal time base, the waveform displayed on the screen
will also change, and the total number of lines containing the decoding
information in the event table will also be changed.
- The displayed decoded data information in the bus is related to the value of the
horizontal time base. Reducing the horizontal time base can help you view the
detailed information.
- Set the event table format: Press
Format, rotate the multifunction knob
to select the display format of "Data" in the event table. Then, press down
the knob to select it. You can also press Format continuously or enable the
touch screen to select it. The available formats include Hex, Dec, Bin, and
ASC.
- Set the view type: Press View, rotate the multifunction knob to select the
form of the event table to be viewed. Then, press down the knob to select it.
Protocol Decoding
264
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...