Loading ...
Loading ...
Loading ...
18.3 Play Options
Waveform playing function can play back the waveforms currently recorded. Before
playing back the waveforms, you can press More > Setting to select "Play" to set the
following parameters.
1. Play Mode
Press Mode continuously to set the playback mode to cycle or single .
- : plays from the start frame to the end frame, then such playback
operation is repeated until you stop it manually.
- : plays from the start frame to the end frame, and then stops
automatically.
2. Playback Sequence
Press Sequence continuously to select the playback sequence to (playback
clockwise) or (playback counterclockwise).
- : plays from the start frame to the end frame.
- : plays from the end frame to the start frame.
3. Interval
The playback interval indicates the time interval between the frames during the
playing process.
Press Interval, then rotate the multifunction knob or use the pop-up numeric
keypad to set the time interval between frames. The available range is from 5 ms
to 10 s.
4. Start Frame
Press Start Frame, then rotate the multifunction knob or use the numeric
keypad to set the start frame for playing back the waveforms. The default is 1, and
the maximum value is the maximum number of recorded frames.
5. End Frame
Press End Frame, and then rotate the multifunction knob or use the pop-up
numeric keypad to set the end frame of playback. The default is the number of
frames of the recorded waveforms.
Waveform Recording and Playing
292
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...