Loading ...
Loading ...
Loading ...
5
To Set the Vertical System
MSO8000A series provides 4 analog input channels (CH1-CH4). Each channel is
equipped with an independent vertical control system. The setting methods for the
vertical systems of the 4 channels are the same. This chapter takes CH1 as an example
to introduce the setting method for the vertical system. By default, only CH1 is
enabled.
5.1 To Enable or Disable the Analog Channel
Enable the Analog Channel:
Connect a signal to CH1, and then press in the vertical control area (Vertical) on
the front panel to enable CH1. Then, the backlight of the channel is illuminated. At
this point, the channel setting menu is displayed at the right section of the screen and
the channel is activated. The channel status label at the bottom of the screen is shown
in the figure below. You can also enable the touch screen to tap the channel status
label to enable the channel.
Vertical Scale
The information displayed in the channel status label is related to the current channel
setting (irrelevant with the on/off status of the channel). After the channel is turned
on, modify the parameters such as the vertical scale, horizontal time base, trigger
mode, and trigger level according to the input signal for easy observation and
measurement of the waveform.
If CH1 is enabled but not activated, the channel status label is shown in the following
figure. To activate the channel, press
on the front panel in the vertical control area
(Vertical) or enable the touch screen to tap the waveform activation channel displayed
on the screen.
Disable the Analog Channel:
If the setting menu of the channel that needs to be disabled (the current channel is
activated) is displayed at the right section of the screen, press the channel key to
disable the channel. If the setting menu of the channel that needs to be disabled is
not displayed at the right section of the screen, first open the setting menu of the
channel to be disabled (activate the channel), then press the channel key to disable
the channel. You can also enable the touch screen to tap the channel status label to
To Set the Vertical System
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
47
Loading ...
Loading ...
Loading ...