Loading ...
Loading ...
Loading ...
- Press BX, then rotate the multifunction knob to adjust the horizontal
position (X-axis) of Cursor B (X cursor). Its adjustable range is limited within
the screen.
- Press AX BX, then rotate the multifunction knob to adjust the horizontal
positions (X-axis) of Cursor A and Cursor B (X cursors). Its adjustable range is
limited within the screen. The horizontal spacing between Cursor A and
Cursor B (X cursors) remains unchanged.
b. When "Y" is selected for the track mode, you can adjust the position of Y cursor.
- Press AY, then rotate the multifunction knob to adjust the vertical
position (Y-axis) of Cursor A (Y cursor).
- Press BY, then rotate the multifunction knob to adjust the vertical
position (Y-axis) of Cursor B (Y cursor).
- Press AY BY, then rotate the multifunction knob to adjust the vertical
positions (Y-axis) of Cursor A and Cursor B (Y cursors). The vertical spacing
between Cursor A and Cursor B (Y cursors) remains unchanged.
NOTE
- If one of the three menu items (
AX, BX, and AX BX) is selected; or one of the three
menu items (AY, BY, and AY BY) is selected; you can press down the multifunction knob
continuously to switch among the three items.
- In track mode, the horizontal cursor (or vertical cursor) will track the marked point in a
timely manner (i.g, the cursor will move up and down with the transient change of the
waveform). Thus, the X value (or Y value) might change even though you do not adjust
the cursor.
4. Measurement Example
Measure the waveforms of CH1 and CH2 with Cursor A and Cursor B, respectively.
Then, expand the waveforms horizontally, and you will find that the cursor will
track the point that has been marked, as shown in the following figure.
Track Measurement (before Horizontal Expansion):
Operations and Measurements
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
195
Loading ...
Loading ...
Loading ...