Loading ...
Loading ...
Loading ...
Press Position, and then rotate the multifunction knob to adjust the vertical
display position of the bus. You can also rotate Wave Vertical POSITION to
adjust the vertical display position of the bus.
- Set the label display
Press Label to enable or disable the label display of the 1553B decoding bus.
When enabled, the bus label "1553B" will be displayed at the upper-left side of
the bus (when the bus display is enabled).
- Set parameters for the event table
Press Event Table to enter the event table setting menu. The event table
displays the decoded data and the corresponding decoding information in time
order in the form of a table. It can be used to observe relatively longer decoded
data. The decoding information includes the decoded data, word type, the
corresponding line number, time, and error information.
- Open or close the event table: Press Event Table continuously to enable or
disable the display of the event table. When enabled, the following event
table as shown in
Figure 15.15
is displayed. You can also enable the touch
screen to tap the icon at the right-upper corner of the event table to close
it.
1553B Bus
Event Table
Line Number
Time
ErrorDataWord Type
Figure 15.15 1553B Decoding Event Table
NOTE
- When you adjust the horizontal time base, the waveform displayed on the screen
will also change, and the total number of lines containing the decoding
information in the event table will also be changed.
Protocol Decoding
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
277
Loading ...
Loading ...
Loading ...