Loading ...
Loading ...
Loading ...
- Press CS, then rotate the multifunction knob to select the desired
channel, and then press down the knob to select it. You can also press CS
continuously or enable the touch screen to select it. The analog channel
(CH1-CH4) or digital channel (D0-D15) can all be selected as the CS channel.
- Press CS Polarity continuously to select Positive or Negative as
the polarity for CS channel.
- When you select the analog channel (CH1-CH4) as the CS channel, press
Threshold, then rotate the multifunction knob or use the pop-up
numeric keypad to set the threshold.
4. Set the Source
Press Sources to enter the signal setting menu.
- Set the CLK
- Press CLK, then rotate the multifunction knob to select the desired source
of the clock channel, and then press down the knob to select it. You can also
press CLK continuously or enable the touch screen to select it. The analog
channel (CH1-CH4) or digital channel (D0-D15) can all be selected.
- When you select the analog channel (CH1-CH4), press Threshold below CLK,
then rotate the multifunction knob or use the numeric keypad to set the
threshold of the clock channel.
- Press Slope to set the instrument to sample MISO and MOSI on the rising
edge ( ) or the falling edge ( ) of CLK.
- Set MISO and MOSI
- Press MISO, then rotate the multifunction knob to select the MISO data
channel, and then press down the knob to select it. You can also press MISO
continuously or enable the touch screen to select it. The available channels
include OFF, analog channels (CH1-CH4), and digital channels (D0-D15).
When you select the analog channel (CH1-CH4), press
Threshold below
Protocol Decoding
250
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...