Loading ...
Loading ...
Loading ...
- The sample rate and the memory depth will change along with the horizontal
time base.
5. Auto Measurement Label
Enable the touch screen, and then tap the label. Up to 41 waveform parameters are
available for auto measurement. It also offers full-memory hardware measurement
function.
6. Save Wave
Provides a diagram of the position of the screen waveform in the memory.
waveform in the memory
screen waveform
7. Trigger Position
Displays the trigger position of the screen waveform and that of the waveform in
the memory.
8. Run/Stop Label
In the run state, the label is displayed in green; while in the stop state, it is
displayed in red. You can enable the touch screen to tap the icon "STOP/RUN" to
control its operating status.
9. Horizontal Position
Use Horizontal
POSITION to modify this parameter. Press down this knob to
quickly reset the horizontal position.
10. Trigger Type
Displays the currently selected trigger type and trigger condition setting. When
you select different trigger types, different labels are displayed. For example,
represents triggering on the rising edge in "Edge" trigger.
11. Source
Displays the currently selected trigger source (CH1-CH4, AC Line, EXT, or D0-D15).
When you select different trigger sources, different labels are displayed. For
example,
denotes that CH1 is selected as the trigger source.
12. Trigger LEVEL/Threshold Level
Quick Start
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
33
Loading ...
Loading ...
Loading ...