Loading ...
Loading ...
Loading ...
Press EdgeB continuously to select the trigger edge type of Source B in Delay trigger.
It can be set to "Rising" or "Falling" .
Trigger Condition:
Press When to set the time limit condition of Delay trigger.
• >: triggers when the time difference (ΔT) between the specified edges of Source
A and Source B is greater than the preset time lower limit. Press Lower to set the
delay time lower limit in Delay trigger.
• <: triggers when the time difference (ΔT) between the specified edges of Source
A and Source B is smaller than the preset time upper limit. Press Upper to set
the delay time upper limit in Delay trigger.
•
< >: triggers when the time difference (ΔT) between the specified edges of
Source A and Source B is greater than the lower limit of the preset time and
smaller than the upper limit of the preset time. Press
Upper to set the delay time
upper limit in Delay trigger. Press Lower to set the delay time lower limit in
Delay trigger.
NOTE
The lower time limit must be smaller than the upper time limit.
•
> <: triggers when the time difference (ΔT) between the specified edges of
Source A and Source B is smaller than the lower limit of the preset time or
greater than the upper limit of the preset time. Press
Upper to set the delay time
upper limit in Delay trigger. Press Lower to set the delay time lower limit in
Delay trigger.
NOTE
The lower time limit must be smaller than the upper time limit.
Trigger Mode:
In the trigger control area (Trigger) on the front panel, press to quickly switch
the current trigger mode. For details, refer to descriptions in "
Trigger Mode
".
Trigger Parameter Setting:
Sets the trigger parameters (trigger holdoff and noise rejection) under this trigger
type. For details, refer to descriptions in "
Trigger Holdoff
" and "
Noise Rejection
".
To Trigger the Oscilloscope
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
105
Loading ...
Loading ...
Loading ...