Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/86485280-mso8074a/bg98.png)
connected to a waveform display device to measure the frequency, the measurement
result is the same as the current capture rate.
NOTE
If you press > System > AUX Out to select "PassFail", then in the pass/fail test, when a
pass/fail event is detected, the oscilloscope outputs a pulse from the rear-panel [TRIG OUT]
connector.
To Trigger the Oscilloscope
136
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...