Rigol MSO8204A Rigol MSO8000A series user guide

Loading ...

Press Region continuously to select to load the waveforms in the "Cursor" or

"Screen" region. When "Cursor" is selected, press Cursor A or Cursor B and

rotate the multifunction knob to adjust the positions of the two cursors

respectively; or press Cursor AB and rotate the multifunction knob to adjust

the positions of cursors A at the same time to determine the waveform range.

- Load

Press Load to load the set channel signal.

2. Load the Waveform

Press Load Stored to enter the waveform loading interface. You can select the

stored waveforms from the internal memory or the external memory. The

waveform file is suffixed with "*.arb". Then, press Load to load the selected

waveform. For details, refer to descriptions in "

Store and Load

21.2.2 To Create the Waveforms

You can create arbitrary waveforms according to your needs. Press Create to enter

the waveform creation menu. Meanwhile, the waveform editor is displayed on the

screen.

• Set the frequency or period

First press Frequency or Period, rotate the multifunction knob to select

"Frequency" or "Period". You can also press Frequency or Period continuously or

enable the touch screen to select it. Rotate the multifunction knob or use the

pop-up numeric keypad to set the frequency or period of the current signal.

• Set the amplitude or high level

First press Amplitude or High Level, then rotate the multifunction knob to

select "Amplitude" or "High Level". You can also press Amplitude or High Level

continuously to select it. Enable the touch screen to select it. Rotate the

multifunction knob or use the pop-up numeric keypad to set the amplitude

or high level of the current signal. Note that if you select "Amplitude" for this

menu, then the menu below Amplitude is automatically turns out to be "Offset";

if you select "High Level" for this menu, then the menu below High Level is

automatically turns out to be "Low Level".

• Set the offset or low level

First press Offset or Low Level, then rotate the multifunction knob to select

"Offset" or "Low Level". You can also press Offset or Low Level continuously to

select it. Enable the touch screen to select it. Rotate the multifunction knob or

use the pop-up numeric keypad to set the offset or low level of the current

signal.

Function/Arbitrary Waveform Generator (Option)

312

Loading ...

Rigol MSO8204A oscilloscope