Loading ...
Loading ...
Loading ...
waveforms of the specified channel on the screen and the channel input
connectors.
•
, : indicates the Function/Arbitrary Waveform Generator key. Press GI
to enable or disable the output of the [GI] connector on the front panel; press
GII to enable or disable the output of the [GII] connector on the front panel;
and then enter the corresponding signal source setting interface. Enable or
disable the status display of the current signal.
NOTE
This function is only available for model installed with the MSO8000-AWG option.
• : indicates the default setting key. Press this key to restore the
instrument to its factory default settings.
• Vertical OFFSET: indicates the channel vertical offset knob. You can rotate
the knob to modify the vertical offset of the current channel waveform. Each
analog channel is configured with an independent vertical offset adjustment
knob. Turn it clockwise to increase the offset, and turn it counterclockwise to
decrease the offset. During the modification, the waveform would move up and
down. Meanwhile, the offset information in the corresponding status label
would change accordingly. Press down this knob to quickly reset the vertical
offset to zero.
• Vertical SCALE: indicates the channel vertical scale knob. It is used to modify
the vertical scale of the current channel. Each analog channel is configured with
an independent vertical scale adjustment knob. Turn it clockwise to decrease
the scale, and turn it counterclockwise to increase the scale. During the
modification, the display amplitude of the waveform will enlarge or reduce. The
scale information in the corresponding status label will change accordingly.
Press down this knob to quickly switch the vertical scale adjustment mode
between "Coarse" and "Fine".
4.6.2 Horizontal
• : indicates the delayed sweep key. Press this key to enable or disable the
delayed sweep function.
Quick Start
26
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...