Loading ...
Loading ...
Loading ...
17
Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the variations of the signal or judge whether the product is up to standard. The pass/
fail test function of this series oscilloscope can accomplish this task perfectly.
17.1 To Enable or Disable the Pass/Fail Test Function
On the front panel, press > PassFail to open the pass/fail test setting menu, or
enable the touch screen and then tap the function navigation icon at the lower-
left corner of the screen to open the function navigation. Then, tap the "Pass/Fail"
icon to open the pass/fail test setting menu.
In the "Pass/Fail" setting menu, press Enable continuously to enable or disable the
pass/fail test function.
NOTE
The pass/fail test function cannot be enabled in the following conditions: when the time base
mode is "XY" or "ROLL"; when the delay sweep is enabled.
17.2 To Start or Stop the Pass/Fail Test Operation
After the Pass/Fail test function is enabled, press Operate continuously to start or
stop the test operation.
During the test process, the oscilloscope will test the waveforms, display the test
information, and output the test information based on the current of settings. You
can set the test mask, the display status of the test information, and the output form
of a pass/ failed test based on the selected source channel for the test. Then save the
test mask range to the internal or external memory, and then recall it when needed.
For the details, please refer to the following section.
NOTE
• Only when the pass/fail test function is enabled, can you start or stop the pass/fail test
operation, enable or disable the display of the test information, save and recall the test
mask range.
• After starting the test operation, you can neither modify the source channel nor adjust
the test mask.
17.3 To Select the Source
Before selecting the source, connect the signal under test to the analog channel input
terminal of the oscilloscope. Press Source, and rotate the multifunction knob to
Pass/Fail Test
284
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Loading ...
Loading ...
Loading ...