Loading ...
Loading ...
Loading ...
Keys
E00300103817
The key fits all locks.
without MITSUBISHI Remote Control
with MITSUBISHI Remote Control
1- Keyless operation key
2- Keyless operation key (with electric tail-
gate switch)
3- Emergency key
WARNING
l
When taking a key on flights, do not press
any switches on the key while on the
plane. If a switch is pressed on the plane,
the key emits electromagnetic waves,
which could adversely affect the plane’s
flight operation.
When carrying a key in a bag, be careful
that no switches on the key can be easily
pressed by mistake.
NOTE
l
The key is a precision electronic device with
a built-in signal transmitter. Please observe
the following in order to prevent a malfunc-
tion.
•
Do not leave in a place that is exposed to
direct sunlight, for example on the dash-
board.
•
Do not disassemble or modify.
•
Do not excessively bend the key or sub-
ject it to strong impacts.
•
Do not expose to water.
•
Keep away from magnetic key rings.
•
Keep away from audio systems, personal
computers, TVs, and other equipment that
generates a magnetic field.
NOTE
•
Keep away from devices that emit strong
electromagnetic waves, such as cellular
phones, wireless devices and high fre-
quency equipment (including medical de-
vices).
•
Do not clean with ultrasonic cleaners or
similar equipment.
•
Do not leave the key where it may be ex-
posed to high temperature or high humidi-
ty.
l
The plug-in hybrid EV system is designed so
that it will not start if the ID code registered
in the immobilizer computer and the key’s
ID code do not match. Refer to the “Elec-
tronic immobilizer” section for details and
key usage.
l
[For vehicles equipped with the security
alarm system]
Pay attention to the following if the security
alarm is set to “Active”.
Refer to “Security alarm system” on page
4-27.
•
If the security alarm is in the system
armed mode, the alarm will sound if the
doors are opened after being unlocked
with the key, the inside lock knob or the
central door lock switch.
•
Even if the security alarm is set to “Ac-
tive”, the system preparation mode is not
entered if the keyless entry system or the
keyless operation function was not used to
lock the vehicle.
Keys
4-02
OGGE16E1
Locking and unlocking
4
Loading ...
Loading ...
Loading ...