Loading ...
Loading ...
Loading ...
When ACC detects a vehicle in
front within the set distance
The ACC makes control to maintain a fol-
lowing distance (time gap) matched with the
vehicle speed between your vehicle and a ve-
hicle in front while also activating brakes as
necessary.
If the vehicle in front stops, the ACC reacts
to it by stopping your vehicle.
Depress the brake pedal as soon as your vehi-
cle comes to a stop.
NOTE
l
If you do not depress the brake pedal within
2 seconds after an automatic stop, you are
alerted to automatic cancellation of the ACC
by a buzzer and display message and the
ACC shifts into the ‘standby state’.
The vehicle will then start creeping as the
brakes are released.
CAUTION
l
Never leave the vehicle when it is stopped
by automatic braking.
When the ACC no longer detects any vehicle
in front, a buzzer sounds and the symbol of
vehicle running ahead disappears from the
screen. The vehicle is slowly accelerated to
resume the set speed and continues running at
that speed.
WARNING
l
Your vehicle may accelerate up to the set
speed in the following situations. Apply
the brake, if necessary, to slow down.
•
When your vehicle no longer follows
the vehicle in front, e.g. at a freeway ex-
it or when your vehicle or the vehicle in
front changes its lane.
•
When driving on a curve.
l
If the vehicle in front turns off or changes
lane and another stationary vehicle is lo-
cated in front of that vehicle, the ACC
will not make deceleration control to the
stationary vehicle.
Adaptive Cruise Control System (ACC)*
7-46
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...