Loading ...
Loading ...
Loading ...
NOTE
l
When the sensors are detecting different ob-
stacles at the same time, the information
screen in the multi information display indi-
cates the directions of the obstacles each
sensors are detecting. However, closer ob-
stacles are given priority over other detected
obstacles and the warning buzzer sounds to
inform you of closer obstacles.
Changing the detection areas
E00615801257
The detection areas can be changed as fol-
lows:
Vehicles with a towing bar
While the operation of the system is stopped
at the “SONAR” switch, push the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds twice to indi-
cate that the detection area has been changed.
Vehicles without a towing bar
While the operation of the system is stopped
at the “SONAR” switch, push the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds once to indicate
that the detection area has been changed.
NOTE
l
The detection area will not change if you
keep the “SONAR” switch pushed for 10
seconds or more.
l
After pushing the “SONAR” switch, revers-
ing sensor system operation differs accord-
ing to the detection area setting.
•
Setting when towing bar is not equipped
When the selector lever is moved to the
“R” position, the reversing sensor system
will operate even if the corner sensor op-
eration was stopped by pushing the “SO-
NAR” switch.
•
Setting when towing bar is equipped
When the reversing sensor system opera-
tion was stopped by pushing the “SO-
NAR” switch, the reversing sensor system
will not operate until the Plug-in Hybrid
EV System has been stopped even if the
selector lever is moved to the “R” posi-
tion.
To resume the reversing sensor system
operation, push the “SONAR” switch or
stop and restart the Plug-in Hybrid EV
System, and then move the selector lever
to the “R” position.
Reversing sensor system warn-
ing display
E00615901450
In case there is a malfunction in the reversing
sensor system, the display for the malfunc-
tioning sensor will blink and the warning
buzzer will sound for approximately 5 sec-
onds. Even after the buzzer and display has
stopped warning, the indication lamp (A) on
“SONAR” switch will continue blinking until
the system reverts to the normal state. Have
the vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point.
Reversing sensor system*
7-80
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...