Loading ...
Loading ...
Loading ...
Symptom Possible cause Possible solution
The charging indicator
is continuously blink-
ing even if the quick
charge connector is
not connected into the
quick charge port
when you start the
plug-in hybrid EV sys-
tem after quick charg-
ing.
Quick charging has not finished
normally.
Perform quick charging again and finish it normally or contact a MITSUBISHI
MOTORS Authorized Service Point.
Plug-in Hybrid EV
System does not start
after quick charging.
The vehicle has a malfunction. There is a possibility that the vehicle has a malfunction. After turning the operation
mode of the power switch to “ON” and putting the select position to “N”, ask the
support of the fellow passenger or people nearby to move the vehicle by pushing it
into safety.
After moving, contact a MITSUBISHI MOTORS Authorized Service Point.
MITSUBISHI Remote
Control*
E08304200084
The MITSUBISHI Remote Control allows to
operate the vehicle within the communication
range of the wireless LAN device (which
conforms to IEEE 802.11b and supports iOS
or Android). The following operations are
available.
NOTE
l
The communication distance differs depend-
ing on the wireless LAN device, due to this
the communication may go down.
1- Wireless LAN device
2- Antenna
MITSUBISHI Remote Control*
3-23
OGGE16E1
Charging
3
Loading ...
Loading ...
Loading ...