Loading ...
Loading ...
Loading ...
CAUTION
l
Improperly handling the system components may result in such problems as degraded sensor performance and ultimately in an accident.
Be sure to take the following precautions to keep the system in good operating conditions.
•
Avoid application of strong shock loads to the sensor.
•
The sensor should be kept clean.
•
Do not cover the sensor with a sticker or anything.
•
Do not modify the suspension of your vehicle.
l
If the bumper has been exposed to an impact, the sensors may fail and prevent the system from functioning properly. Have the vehicle inspected a
MITSUBISHI MOTORS Authorized Service Point.
Obstacle detection areas
E00643500047
The detection areas of the sensors are limited.
Moreover, the sensors are unable to detect
low or thin objects or objects near the rear
bumper. Make sure to check the surroundings
as you operate the vehicle in a safe manner.
Sensor locations
E00643600035
There are the sensors (A) on each of 4 places
of the front bumper and the rear bumper.
CAUTION
l
The Ultrasonic misacceleration Mitigation
System may not operate because the sensor
cannot detect the vehicle in front or obstacle
as follows.
•
Vehicle towing a trailer etc.
•
A freight trailer that is not carrying a con-
tainer.
•
Vehicle that has a protruding load from
the carrier.
•
A obstacle with a low height.
•
Vehicle that has an extremely high ground
clearance.
•
Vehicle that is extremely stained.
•
Vehicle or obstacle that is covered with
snow.
•
The vehicle is the specific shape such as
the carrier car.
•
Obstacles that have the shape of the pole
such as the road marker or the streetlight.
Ultrasonic misacceleration Mitigation System*
7-67
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...