Loading ...
Loading ...
Loading ...
The selected blower speed will be shown in
the display (A).
1- Increase
2- Decrease
Temperature control switch
E00703001673
Press or of the temperature control
switch to the desired temperature.
The selected temperature will be shown in
the display (A).
NOTE
l
The temperature value of air conditioning is
switched in conjunction with outside tem-
perature display unit of the multi informa-
tion display.
Refer to “Changing the temperature unit” on
page 6-18.
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will not change instantly, even if you have
selected warm air with the switch.
To prevent the windscreen and windows
from fogging up, the ventilator mode will be
changed to “ ” and the blower speed will
be reduced while the system is operating in
the AUTO mode.
NOTE
l
When you feel that it is hot or cold to the
setting temperature, it is possible to adjust so
that you can feel more comfortable.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
l
When the temperature is set to the highest or
the lowest, the air selection and the air con-
ditioning will be automatically changed as
follows.
Also, if the air selection is operated manual-
ly after an automatic changeover, manual
operation will be selected.
•
Quick Heating (When the temperature is
set to the highest setting)
Outside air will be introduced and the air
conditioner will stop.
•
Quick Cooling (When the temperature is
set to the lowest setting)
Inside air will be recirculated and the air
conditioner will operate.
l
When the air conditioner is set to quick heat-
ing, the engine starts running (except vehi-
cles with electric heater).
The settings described above are the factory
settings.
Automatic climate control air conditioner
8-07
OGGE16E1
For pleasant driving
8
Loading ...
Loading ...
Loading ...