Loading ...
Loading ...
Loading ...
How to use ACC
E00635001213
To start up (place in ‘standby
state’) the system
With the operation mode set to “ON”, press
the “ACC ON/OFF” switch shortly to acti-
vate the ACC.
The display on the information screen of the
multi-information display will switch to show
information on the ACC.
When the ACC is activated, it is placed in the
‘standby state’ at which any control function
is not started.
NOTE
l
Even if the ACC is in the activated state
when the operation mode is set to “OFF”,
the system does not automatically become
activated when the operation mode is set to
“ON” next time.
To activate ACC control
With the ACC turned on (in the ‘standby
state’), push down the “SET -” switch while
driving.
When your desired speed is reached, release
the “SET -” switch; then this speed is set and
the ACC initiates the speed control to the set
speed.
The set speed is indicated on the information
screen of the multi-information display.
The ACC can be selected between approxi-
mately 40 km/h (25 mph) to 180 km/h
(112 mph).
You can set and initiate the speed control
when driving at approximately 10-40 km/h
while a vehicle in front is being detected. In
this case, the target speed is set to 40 km/h
(25 mph).
Setting to any speed outside this range does
not cause the ACC to start the control.
Adaptive Cruise Control System (ACC)*
7-49
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...