Loading ...
Loading ...
Loading ...
NOTE
l
When connecting or disconnecting the nor-
mal charge connector, insert/pull out the
connector straight.
Also, do not incline or twist the connector.
Doing so could cause a bad connection or
malfunction.
l
Make sure to lock the doors to prevent theft,
etc. during charging.
Charging from rated AC
220-240 V outlet
E08301001222
1. Firmly apply the parking brake, press the
electrical parking switch, and shift to
“P” (PARK) position.
2. Turn off electrical equipment such as
lamps and put the operation mode of the
power switch in OFF.
3. After unlocking the charging lid by us-
ing the central door locks, keyless entry
system or keyless operation function,
push the rear portion of the charging lid
(A) until it clicks, and open the charging
lid.
4. Press the tab (B) to open the inner lid
(C).
WARNING
l
It could cause electric leak, a fire or elec-
tric shock by entering water or dust into
the normal charge port.
l
Do not touch the metal terminal of the
normal charge port (D) and the normal
charge connector.
Doing so could cause an electric shock
and/or malfunction.
NOTE
l
There is a hole on the charge port for water
drainage. If this hole is blocked and water
gets trapped in the charge port, do not
charge. Please contact a MITSUBISHI
MOTORS Authorized Service Point.
l
If the charge port is frozen, melt the ice us-
ing a hair drier. Forcing the charge connec-
tor to connect while frozen could result in
malfunction.
5. Insert the charging cable plug into an
outlet.
WARNING
l
Make sure that the plug is inserted all the
way into the outlet before use. If charging
is continued in the state where it is not
fully inserted the plug, there is a possibili-
ty of generating abnormal heat and re-
sulting in a fire.
Normal charging (charging method with rated AC 220-240V outlet)
3-12
OGGE16E1
Charging
3
Loading ...
Loading ...
Loading ...