Loading ...
Loading ...
Loading ...
WARNING
l
Although the set speed driving will be de-
activated when shifting to the “N” (NEU-
TRAL) position, never move the selector
lever to the “N” (NEUTRAL) position
while driving.
You would have no regenerative brake
and could cause a serious accident.
CAUTION
l
When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by a MITSUBISHI
MOTORS Authorized Service Point.
NOTE
l
You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
l
If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to “N” position.
•
The electrical parking switch is pressed
during driving.
•
The selector lever is shifted to “R” during
driving forward.
•
The selector lever is shifted to “D” during
driving backward.
NOTE
•
The selector lever is shifted to “B” when
the select position is in “R”.
To resume the set speed
E00609801858
If the set speed driving is deactivated by the
condition described in “To deactivate” on
page 7-37, you can resume the previously set
speed by push up the RES + switch (C) while
driving at a speed of about 40 km/h (25 mph)
or higher. The “SET” indicator appears on
the information display in the meter cluster.
Under either of the following conditions,
however, using the switch does not allow you
to resume the previously set speed. In these
situations, repeat the speed setting procedure:
l
The CRUISE CONTROL ON/OFF
switch is pressed.
l
The operation mode is put in OFF.
l
Indicator display go off.
Speed Limiter*
E00633201093
The Speed Limiter is a driver assist function
to prevent from exceeding the speed set by
driver while Plug-in Hybrid EV System pow-
er control.
CAUTION
l
Because the system does not use service
brake (hydraulic brake), the vehicle speed
may exceed the set speed on the downhill.
If a driver wants to keep the vehicle speed in
such a situation, he/she must put on a service
brake.
If the vehicle speed exceeds the set speed
(about 3 km/h (2 mph)), the indicator will
brink in the combination meter.
If the vehicle speed exceeds the set speed
about +3 km/h (2 mph) more than about 5
seconds after indicated alert message, beep
alert is sounded for about 10 seconds at the
most.
While running without alert message, if you
decrease the set speed and vehicle speed is
more than set speed about +3 km/h (2 mph),
alert message is displayed but beep alert is
delayed.
Speed Limiter*
7-38
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...