Loading ...
Loading ...
Loading ...
Screen Cause Solution (Reference)
l
The keyless operation key is not detected.
l
Insert the keyless operation key into the
key slot.
Refer to “If the keyless operation key is
not operating properly” on page 7-12.
l
You have forgotten to remove the keyless
operation key from the key slot.
l
Remove the keyless operation key from
the key slot.
Refer to “Keyless operation key remind-
er” on page 7-13.
l
There is a fault in the EPS.
l
Have the vehicle inspected by a
MITSUBISHI MOTORS Authorized
Service Point as soon as possible.
Refer to “Electric power steering system
(EPS)” on page 7-31.
l
The brake fluid level in the reservoir has
fallen to a low level.
l
There is a fault in the brake system.
l
Immediately stop the vehicle in a safe
place.
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Brake warning display” on page
6-46.
l
When the brake pedal has been repeatedly
depressed over a short period of time, the
brake warning lamp may come on and the
brake warning buzzer may sound, and this
warning may be displayed.
l
If this warning display has disappeared
and the brake warning lamp goes out and
the buzzer stops a few seconds after stop-
ping the brake operation, there is no ab-
normality.
Indication lamp, warning lamp, and information screen display list
6-27
OGGE16E1
Instruments and controls
6
Loading ...
Loading ...
Loading ...