Loading ...
Loading ...
Loading ...
Snow traction device (tyre
chains)
E01002103020
If snow traction device (tyre chains) have to
be used, ensure that they are fitted only on
the drive wheels (front) in accordance with
the manufacturer’s instructions.
On 4WD vehicles in which the driving power
is distributed preferentially to the front
wheels, ensure that the snow traction device
(tyre chains) are fitted on the front.
Use only snow traction device (tyre chains)
which are designed for use with the tyres
mounted on the vehicle: use of the incorrect
size or type of snow traction device (tyre
chains) could result in damage to the vehicle
body.
Contact a MITSUBISHI MOTORS Author-
ized Service Point before putting on snow
traction device (tyre chains). The max. snow
traction device (tyre chains) height is as fol-
lows.
Tyre size Wheel size Max. snow
traction de-
vice (tyre
chains)
height [mm]
215/70R16
100H
16 x 6 1/2 J
16 x 6 1/2 JJ
9 mm
Tyre size Wheel size Max. snow
traction de-
vice (tyre
chains)
height [mm]
225/55R18
98H
18x7 J 9 mm
When driving with a snow traction device
(tyre chains) on the tyres, do not drive faster
than 50 km/h (30 mph). When you reach
roads that are not covered in snow, immedi-
ately remove the snow traction device (tyre
chains).
CAUTION
l
Choose a clear straight stretch of road where
you can pull off and still be seen while you
are fitting the snow traction device (tyre
chains).
l
Do not fit snow traction device (tyre chains)
before you need them. This will wear out
your tyres and the road surface.
l
After driving around for 100-300 meters,
stop and retighten the snow traction device
(tyre chains).
l
Drive carefully and do not exceed 50 km/h
(30 mph). Remember that preventing acci-
dents is not the purpose of snow traction de-
vice (tyre chains).
l
When snow traction device (tyre chains) are
installed, take care that they do not damage
the disc wheel or body.
CAUTION
l
An aluminium wheel can be damaged by a
snow traction device (tyre chains) while
driving. When fitting a snow traction device
(tyre chains) on an aluminium wheel, take
care that any part of the snow traction device
(tyre chains) and fitting cannot be brought
into contact with the wheel.
l
Remove the wheel covers before installing a
snow traction device (tyre chains), otherwise
they may be damaged by the snow traction
device (tyre chains). (See page 9-17.)
l
When installing or removing a snow traction
device (tyre chains), take care that hands and
other parts of your body and not injured by
the sharp edges of the vehicle body.
NOTE
l
The laws and regulations concerning the use
of snow traction device (tyre chains) vary.
Always follow local laws and regulations.
In most countries, it is prohibited by the law
to use of snow traction device (tyre chains)
on roads without snow.
Wiper blade rubber
replacement
E01002600532
Windscreen wiper blades
1. Lift the wiper arm off the windscreen.
Wiper blade rubber replacement
11-13
OGGE16E1
Maintenance
11
Loading ...
Loading ...
Loading ...