Loading ...
Loading ...
Loading ...
When the operation mode is in any mode oth-
er than OFF; if you close all the doors and
the tailgate, and then try to lock the doors and
tailgate by pressing the driver’s or front pas-
senger’s door lock/unlock switch, or the tail-
gate LOCK switch, a warning lamp will blink
or warning display will appear, and the outer
buzzer will sound preventing you from lock-
ing the doors and tailgate.
Operation mode ON reminder
system
E00632301068
If the driver’s door is opened while the Plug-
in Hybrid EV System is stopped and the op-
eration mode in any mode other than OFF,
the operation mode ON reminder inner buz-
zer sounds intermittently to remind you to put
the operation mode in OFF.
Starting and stopping the
Plug-in Hybrid EV System
E00620601295
Starting the Plug-in Hybrid EV
System
E00620701661
CAUTION
l
When the Plug-in Hybrid EV System warn-
ing lamp comes on while the READY indi-
cator is on, avoid high-speed driving and
have your vehicle inspected by a
MITSUBISHI MOTORS Authorized Serv-
ice Point as soon as possible. (Refer to
“Plug-in Hybrid EV System warning lamp”
on page 6-46.)
l
Never attempt to start the engine by pushing
or pulling the vehicle.
1. Check that the EV charging cable is not
connected to your vehicle.
2. Fasten the seat belt.
3. Make sure the parking brake is applied.
4. Press and hold the brake pedal down
firmly with your right foot.
5. When you press the power switch while
depressing the brake pedal, the READY
indicator in the meter blinks and the acti-
vation of Plug-in Hybrid EV System
starts.
6. When the READY indicator changes
from blinking to staying on, the startup
of Plug-in Hybrid EV System is activa-
ted and the vehicle is now ready to drive.
CAUTION
l
Do not press the power switch while holding
the select lever at the operated position.
NOTE
l
Continue to depress the brake pedal until the
READY indicator in the meter stays on.
l
After the Plug-in Hybrid EV System has not
started for a while, the brake pedal effort
needed to start the Plug-in Hybrid EV Sys-
tem may become greater.
If this occurs, depress the brake pedal more
than usual.
l
You can drive your vehicle even if the en-
gine is stopped.
l
The Plug-in Hybrid EV System can be star-
ted in any operation mode.
l
If the READY indicator does not come on,
check the select position indicator. If the in-
dicator does not indicate “P”, press the elec-
trical parking switch to display “P” position.
l
If the READY indicator does not come on,
turn the power switch to OFF once and, after
a while, press the power switch to start Plu-
gin Hybrid EV System.
Starting and stopping the Plug-in Hybrid EV System
7-11
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...