Loading ...
Loading ...
Loading ...
2. Lightly press the multi information dis-
play switch to select “ ” (language co-
operative control).
3. Press and hold the multi information dis-
play switch to switch from A/1 (lan-
guage cooperation enabled) to M/2/P
(language cooperation disabled), or from
M/2/P to A/1.
The setting is changed to the selected
condition.
NOTE
l
The language display modified with the lan-
guage setting can be switched in the follow-
ing manner.
NOTE
•
When A or 1 has been selected with the
language cooperative control, the lan-
guage for MITSUBISHI Multi-Communi-
cation System (MMCS), Bluetooth
®
2.0
interface or Multi Around Monitor is au-
tomatically changed to the language se-
lected for the multi information display.
However, this changing function may not
work depending on the language selected
for the multi information display.
•
When M, 2 or P has been selected with
the language cooperative control, the lan-
guage for MITSUBISHI Multi-Communi-
cation System (MMCS), Bluetooth
®
2.0
interface or Multi Around Monitor is not
automatically changed to the language se-
lected for the multi information display.
l
The language on the display of the audio
system (if so equipped) is not automatically
changed even if you select A or 1 of the lan-
guage cooperation control.
Operation sound setting
E00205700021
You can turn off the operation sounds of the
multi information display switch and rheostat
illumination button.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing function settings” on
page 6-16
2. Lightly press the multi information dis-
play switch to select " " (operation
sound setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from ON (operation sound on)
to OFF (operation sound off), or from
OFF to ON.
The setting is changed to the selected
condition.
NOTE
l
The operation sound setting only deactivates
the operation sound of the multi information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
E00523501702
The time until the display appears can be
changed.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest
time setting).
Multi information display
6-20
OGGE16E1
Instruments and controls
6
Loading ...
Loading ...
Loading ...