Loading ...
Loading ...
Loading ...
dicator continues, there may be a fault in
the system. Please contact a
MITSUBISHI MOTORS Authorized
Service Point.
l
When some problem occurs with the
system. (In this situation, the ACC con-
trol is automatically cancelled and the
system is turned off. You are alerted to
this situation by the sound of a buzzer
and a message on the display. If the mes-
sage remains displayed even after setting
the operation mode to “ON”, please con-
tact a MITSUBISHI MOTORS Author-
ized Service Point.)
l
When some other condition which cau-
ses the control to terminate occurs. (This
situation may indicate a fault. Turn off
ACC and please contact a MITSUBISHI
MOTORS Authorized Service Point.)
To turn off ACC
Press the “ACC ON/OFF” switch when ACC
is in the ‘ON state’ to turn off ACC.
NOTE
l
Pressing the switch turns off the ACC even
if it is engaged.
l
The set speed is cancelled when the ACC is
turned off or the operation mode is set to
“OFF”.
l
If the ACC is in the ‘ON state’ when the op-
eration mode is set to “OFF”, the system is
set to the ‘OFF state’ when the operation
mode is set to “ON” next time.
To resume the control
After cancelling the ACC control (i.e. placing
the system in the ‘standby state’) by pressing
the “CANCEL” switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
“RES -” switch.
Adaptive Cruise Control System (ACC)*
7-54
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...