Loading ...
Loading ...
Loading ...
Symptom Possible cause Possible solution
Normal charging is
discontinued.
The Charging timer was set up by
the MITSUBISHI Remote Control
(if so equipped) or the
MITSUBISHI Multi Communica-
tion System (MMCS) (if so equip-
ped) after starting of normal
charging.
Cancel all the charging timer settings. Charging is automatically restarted if you
cancel the charging timer.
Refer to “MITSUBISHI Remote Control” on page 3-23.
For the MITSUBISHI Multi Communication System (MMCS) refer to the separate
owner’s manuals.
Quick charging cannot
be started.
The charge connector is not con-
nected correctly and/or not locked.
Check that the charge connector is connected correctly and that it is locked.
The self-diagnostic function of the
quick charge device returns a neg-
ative result.
There is a possibility that the vehicle has a malfunction. Stop charging and contact
a MITSUBISHI MOTORS Authorized Service Point.
The power switch of the quick
charger is off.
Check the power switch of the quick charger.
Consult an administrator or a maker of the quick charger.
Quick charge is discon-
tinued.
Charging is stopped by the quick
charge timer.
Charging will stop depending on the timer function setting of the quick charge de-
vice. If you need to charge the drive battery more, start the charging procedure
again.
Charging stops at 80% capacity. Charging is designed to stop when the drive battery capacity reaches 80%. If you
need to charge the drive battery more than 80%, start the charging procedure again.
The power supply for the quick
charger is off.
Check whether the power supply for the quick charger is off.
Consult an administrator or a maker of the quick charger.
Charging troubleshooting guide
3-22
OGGE16E1
Charging
3
Loading ...
Loading ...
Loading ...