Loading ...
Loading ...
Loading ...
CAUTION
•
Obstacles that exists in the high position
from the ground.
•
Obstacles that are soft and absorb ultra-
sonic easily, such as spongy material or
snow.
•
Obstacles that are shaped with a sharp an-
gle.
•
A fence with large mesh.
•
Moving object.
•
When there is a loud noise or an ultrason-
ic near your vehicle by horn of other vehi-
cle, engine sound of a motorcycle, air
brake noise of a large vehicle, a vehicle
detector and sonar of a vehicle etc.
•
When an electrical equipment on the mar-
ket (radio antenna etc.) is installed near
the sensor.
•
When there is a obstacle that is not recog-
nized between your vehicle and the obsta-
cle that can be recognized.
NOTE
l
The sensors do not detect objects located in
the area directly below or near the bumper.
If the height of an object is lower than the
mounted position of the sensors, the sensors
may not continue detecting it even if they
detected it initially.
To turn on/off the Ultrasonic
misacceleration Mitigation Sys-
tem
E00643800053
The Ultrasonic misacceleration Mitigation
System is automatically turned ON by setting
the operation mode to ON. In addition, the
Ultrasonic misacceleration Mitigation System
ON/OFF is switched in conjunction with the
ON/OFF state of the FCM.
Refer to . “FCM and Ultrasonic misaccelera-
tion Mitigation System ON/OFF switch” on
page 7-60
Warning display
E00643900025
When the sensor is temporarily
not available
E00647600033
Example: When the front and/or rear sensors
are temporarily not available
When the warning display appears, the sen-
sors are temporarily not available for some
reason such as the environmental condition
or increase of the sensor temperature. When
the warning display appears continuously,
contact a MITSUBISHI MOTORS Author-
ized Service Point.
When there is a malfunction in
the sensor or the system
E00644000036
Example: When there is a malfunction in
both sensors
When the warning display appears, the Ultra-
sonic misacceleration Mitigation System
does not operate normally because there are
some malfunctions in the system. Have the
vehicle inspected at a MITSUBISHI
MOTORS Authorized Service Point as soon
as possible.
Ultrasonic misacceleration Mitigation System*
7-68
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...