Loading ...
Loading ...
Loading ...
Situation Operation display Buzzer
When an obstacle is detected behind your ve-
hicle with the selector lever in the “R” posi-
tion, if the accelerator pedal is depressed
promptly and too strongly, the motor output is
suppressed for up to approximately 5 seconds.
*UMS: Ultrasonic misacceleration Mitigation
System
Intermittent beeping sound
WARNING
l
Do not overly rely on the Ultrasonic misacceleration Mitigation System. It is never a substitute for your safe and careful driving. Always be careful
to operate the accelerator pedal perceiving the environmental conditions. Misoperation can lead to a serious accident.
l
As the Ultrasonic misacceleration Mitigation System is not a function to keep the stop condition of the vehicle, depress the brake pedal according to
the environmental condition.
l
Depending on the situation, the system does not operate even if the vehicle or the obstacle in front and behind your vehicle and this may cause the
vehicle to start suddenly and lead to a serious accident.
l
If the vehicle is trapped in the railway crossing because the system is activated as the crossing barrier is misrecognised as an obstacle, escape from
the railway crossing without any panic by one of the following methods.
•
Release the foot from the accelerator pedal and lightly depress the pedal again.
•
Turn the system OFF. (Continuously press the Forward collision mitigation system (FCM) and Ultrasonic misacceleration Mitigation System
ON/OFF switch for more than 3 seconds.)
•
Continuously depress the accelerator pedal for more than 5 seconds.
•
Repeat to press the accelerator pedal quickly to its full stroke more than 3 times.
l
Do not perform inspection of the system operation on your own. Depending on the situation, this may cause the system to not operate properly and
lead to a serious accident.
Ultrasonic misacceleration Mitigation System*
7-64
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...