Loading ...
Loading ...
Loading ...
Stopping the Plug-in Hybrid
EV System
E00620801268
1. Stop your vehicle completely.
2. Apply the parking brake firmly while
depressing the brake pedal.
3. After pressing the electrical parking
switch, press the power switch to stop
Plug-in Hybrid EV System. (Refer to
“Electrical Parking switch” on page
7-15.)
WARNING
l
Never stop Plug-in Hybrid EV System
during running except in emergency. The
effectiveness of the brake becomes very
poor and the steering wheel becomes very
heavy, which can easily lead to an acci-
dent.
NOTE
l
Do not operate the power switch during run-
ning except in emergency. If you have to
stop Plug-in Hybrid EV System in emergen-
cy during running, continue to press the
power switch for three seconds or longer or
press the power switch three times or more
quickly. Plug-in Hybrid EV System stops,
the operation mode turns to ACC, and the
selector lever position shifts to the “P” posi-
tion at very slow speed.
NOTE
l
If you press the power switch when the se-
lector lever position is other than “P” posi-
tion while your vehicle is stopped, the selec-
tor lever position automatically shifts to “P”
position, Plug-in Hybrid EV System stops,
and the power mode turns to “OFF”.
l
If the parking lock mechanism is faulty, a
warning is displayed on the information
screen in the multi-information display.
When this warning is displayed, Plug-in Hy-
brid EV System cannot be stopped unless
you apply the parking brake and then press
the power switch. Park on a flat place with
the parking brake securely applied. Have
your vehicle inspected by a MITSUBISHI
MOTORS Authorized Service Point.
If the keyless operation key is
not operating properly
E00632901178
Insert the keyless operation key into the key
slot. Starting the Plug-in Hybrid EV System
and changing the operation mode should be
now possible.
Remove the keyless operation key from the
key slot after starting the Plug-in Hybrid EV
System or changing the operation mode.
NOTE
l
Do not insert into the key slot anything other
than the keyless operation key. This could
cause damage or a malfunction.
l
Remove the object or additional key from
the the keyless operation key before insert-
ing the key into the key slot. The vehicle
may not be able to receive the registered ID
code from the registered key. Therefore, the
Plug-in Hybrid EV System may not start and
the operation mode may not change.
l
The keyless operation key is fixed in the key
slot when inserted in the illustrated direc-
tion. Simply pull out the key to remove it
from the key slot.
Starting and stopping the Plug-in Hybrid EV System
7-12
OGGE16E1
Starting and driving
7
Loading ...
Loading ...
Loading ...