Loading ...
Loading ...
Loading ...
Misting function
The misting function can be operated with
the operation mode of the power switch in
ON or ACC.
The wipers will operate once if the wiper lev-
er is raised to the “MIST” position and re-
leased. This operation is useful when it is
drizzling, etc. The wipers will continue to op-
erate while the lever is held in the “MIST”
position.
Vehicles with rain sensor
E00517001571
The windscreen wipers can be operated with
the operation mode of the power switch in
ON or ACC.
If the blades are frozen to the windscreen or
rear window, do not operate the wipers until
the ice has melted and the blades are freed,
otherwise the wiper motor may be damaged.
MIST- Misting function
The wipers will operate once.
OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically
operate depending on the degree
of wetness on the windscreen.
LO- Slow
HI- Fast
Rain sensor
Can only be used when the operation mode
of the power switch is in ON.
If the lever is put in the “AUTO” position,
the rain sensor (A) will detect the extent of
rain (or snow, other moisture, dust, etc.) and
the wipers will operate automatically.
Keep the lever in the “OFF” position if the
windscreen is dirty and the weather is dry.
Wiper operation under these conditions can
scratch the windscreen and damage the wip-
ers.
CAUTION
l
With the operation mode in ON and lever in
the “AUTO” position, the wipers may auto-
matically operate in the situations described
below.
If your hands get trapped, you could suffer
injuries or the wipers could malfunction. Be
sure to put the operation mode in OFF, or
move lever to the “OFF” position to deacti-
vate the rain sensor.
Wiper and washer switch
6-56
OGGE16E1
Instruments and controls
6
Loading ...
Loading ...
Loading ...