User Manual - Page 669

For 1474C009AA. Also, The document are for others Canon models: MF735CDW, MF733CDW, MF731CDW, MF634CDW, MF632CDW

Loading ...
Loading ...
Loading ...
Blocking Jobs When Department ID Is Unknown(P. 360)
#703
Data could not be written because the memory space that was allocated for images was full when
sending an e-mail/I-Fax or storing to a shar
ed folder/FTP server.
If another sending document is queued, wait for a while until it is completed, and send again.
Divide the document into multiple sections before sending.
Delete the documents that are stored in memory.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
#751
The FTP server has not been started up or a network connection has been cut.
(Failur
e to connect to the destination is sometimes caused by a disconnection en route.)
Check the destination.
Check the network status.
Viewing Network Settings(P. 37)
The IP addr
ess was not set correctly.
Check <TCP/IP Settings>.
Setting IP Addresses(P. 30)
#752
E-mail sending or I-Fax sending/receiving was impossible because an incorrect SMTP/POP3 server name
was set.
Check the SMTP/POP3 server name, and corr
ect the setting.
Conguring Basic E-Mail Settings(P
. 86)
Conguring E-Mail/I-Fax Communication Settings
(P. 89)
E-mail sending or I-Fax sending/receiving was impossible because an incorrect domain name was set.
Check the domain name, and correct the setting.
Conguring DNS(P
. 55)
E-mail sending or I-Fax sending/receiving was impossible because the machine was not connected to a
network correctly.
Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 617)
#753
Scanned data could not be sent as e-mail, not sent/received as I-Fax, or not stored in the shared
folder/FTP server because the LAN cable is disconnected.
Troubleshooting
661
Loading ...
Loading ...
Loading ...